The #1 reason for experiencing low pressure is a plugged filter or cartridge. If you have a cartridge style sediment filter it may be plugged and due to be changed. If you have a down flow, up flow or backwashing style filter, it can also become plugged with sediment, iron or other minerals over time. Sometimes “re-bedding” the unit or complete replacement is needed.
What are the other problems that can cause low pressure?
The pressure switch (switch that tells pump when to turn on and off) can become plugged with sediment or minerals and in turn register incorrect pressures- very low and very high. Is the pressure poor through the whole house or only at 1 or 2 faucets? Sometimes taking care of low pressure is as simple as cleaning sediment or debris out of a faucet screen (aerator).
Pressure problems can also stem from the particular style well system. A “jet” system typically is a low pressure system because of the antiquated technology. The older the system – the more likely low pressure is to occur. This is also true of submersible well pumps. This can be because of several reasons: worn pump impellers, slow or worn pump motor, leaks down well such as split pipes or holes in metallic parts (if corrosive water). The water level in the well is also a factor. The lower the level- the less volume a pump can push.
“Not so common” factors include improperly sized plumbing, too many fittings & direction changes causing flow restriction, or complete closure of the pipe due to heavy iron build up or other mineral.
In summation, most pressure problems are easily fixed with one call to Greco & Haines. Your pressure problems are easily taken care of by the professionals at Greco & Haines.
Low Water Pressure FAQs
A: Restriction such as plugged filter, plugged water filtration unit, or a valve ½ closed could be the source of the problem
A: This could be due to a worn jet body in the well, worn pump, plugged pipe or jet body, split in pipe back to well, bad pressure switch. Contact us today for your solution!
A: You may have a worn pump head, or a leak/split in well pipe between pump and house. Some other causes include a plugged pump or well pipe due to iron, bad pressure switch, or your tank may need air or need to be replaced.
The best answer: Call Greco & Haines!